How to Install Comspike in Starfield: Guide 1

In the vast universe of Starfield, developed by Bethesda Game Studios, players are given the freedom to customize and modify their ships to their liking. Today’s guide will delve into the specifics of installing two essential modules: the Comspike and the Conduction Grid. These modules are pivotal for enhancing your ship’s capabilities and ensuring smooth communication and energy distribution.

How to Install Comspike and Conduction Grid in Starfield

Installing modules in Starfield is not just about boosting your ship’s stats; it’s about tailoring your spacecraft to fit your exploration needs. This guide will provide a step-by-step walkthrough on how to seamlessly install the Comspike and Conduction Grid modules, ensuring your ship is equipped for any challenge the cosmos throws at you.

To successfully install these modules, follow the steps outlined below:

1. Accessing Ship Services

  • Land at a location equipped with ship services. For this guide, we’ll use the New Atlantis port area on Jemison.
  • Interact with the ship services technician, Jasmine, and choose the option to view and modify your ships.

2. Navigating to the Ship Builder

  • In the ship modification interface, select the “Ship Builder” option.
  • Ensure you’re working with the correct ship if you own multiple vessels.

3. Adding Modules

  • Move away from your ship to access the “Add” command.
  • Navigate to the “Equipment” section, where you’ll find both the Comspike and Conduction Grid modules.
  • Select the Comspike module and place it on an available slot on your ship.
  • Repeat the process for the Conduction Grid module.

4. Positioning the Modules

  • Both modules can be placed on available slots on your ship. Ensure they fit correctly and do not protrude excessively.
  • The modules should snap into place, turning green when positioned correctly.

5. Flight Check

  • Once both modules are installed, perform a flight check to ensure all systems are functioning correctly. This can be done using the “Flight Check” option in the bottom right corner of the interface.
  • If the flight check is successful, all systems will display as “normal.”

Equipping your ship with the Com Spike and Conduction Grid modules in Starfield is essential for enhancing communication and energy distribution capabilities. By following this guide, you can ensure that your ship is well-equipped and ready to tackle the challenges of the vast universe. Remember, a well-prepared ship is the key to a successful spacefaring journey!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *